Copper Astro Lava Lamp

99.00

The original Copper Retro Astro Lava Lamp.

Clear
SKU: N/A Categories: , , , Tags: , ,

Description

The original Copper Retro Astro Lava Lamp

The first lava lamp designed by the founder of Mathmos and inventor of lava lamps Edward Craven Walker in 1963.

This retro lamp has hand-spun copper anodised metal, the finish originally used for the astro in the 1960s and ‘70s. It looks as fresh today as it did in 1963 when it first rolled off the production line in Poole, Dorset.

Available in a selection of lava colour combinations all with Mathmos’ unique lava lamp formulation.

  • Weight: 2.95kg
  • Product size: height 430mm
  • Power: Mains power
  • Materials: Hand spun aluminium base and copper anodised finish. Glass bottle. Mathmos lava formula.

 

 

“Quality of finish and awesome quality of work. It’s fantastic.”

 

“My sister had the yellow/orange lava lamp back in 1965, for her 1st wedding anniversary and as a child i was fascinated by the lava, Its still just as relaxing, its a beautiful lamp”

 

Mathmos lava lamp instructions

Position

Choose a position for your lamp on a level surface in a room with a temperature between 20 and 24°C or (69 to 75°F).

Place the lamp well away from;

  • children under 14 years to prevent breakage
  • sunlight to prevent fading
  • drafts to prevent slow operation
  • cold places to prevent freezing
  • hot places to prevent overheating
  • animals to prevent breakage
  • do not place on carpets or block the ventilation spaces beneath the lamp.

Set-Up & Warm-Up

Put the bottle on the base with the screw cap at the top. If it is not sitting straight please rotate a little. Then plug it in and turn it on. NB. It is normal for the glass to have small air bubbles and moulding scars.

Warm-up takes between 1 and 3 hours depending on the size of the model and the surrounding temperature. Stalagmite shapes may form during the warm-up process, these will then melt and the lava will begin to flow.

Operation

Your Mathmos lava lamp will operate best after it has been used four or five times. For the first few times, you may see small air bubbles in the lava. Please do not leave your lava lamp on for more than six hours a day; this will prolong the life of your lamp.

Overheating will shorten the light of the life of the lamp. Overheating is occurring if there is either one large bubble or many smaller ones. Never move or shake the lamp when it is in use or still warm as this causes irreparable clouding. It is normal for the base to become very hot.

Replacements

When your lava lamp has ended its life it will begin to go cloudy, the colours may fade and it will not move as well as it once did. This will happen after approximately 2000 hours of operation. You can then buy a new bottle at from us in the current colours available. Please note we do not refill bottles and please on no account open the bottle or add liquids.

If the bulb blows please replace it with one of the same type and wattage. Only fit the correct bulb, as stated on the label in the base. Again bulbs can be bought from us as can many replacement parts.

Safety

This lamp has passed the relevant safety standards and carries the statutory guarantee of the country of purchase. The liquid in the lamps are not dangerous and can be disposed of normally. Never use a lamp if the bottle has been dropped as this will create weakness in the glass, obtain a replacement bottle and dispose of the old one. Do not leave the lamp unattended with small children. If the liquid is swallowed by mistake drink plenty of water. If it is spilt onto the skin or had contact with the eyes pour on cold water.

 

Please allow 14 days for delivery

Additional information

Select Colour

Violet with red lava, Violet with orange lava, Blue with green lava, Yellow with orange lava, Clear with plum lava, Blue with blue lava

You may also like…